Salt Spray Test Chamber SST-216B
Salt Spray Test Chamber SST-216B> by UMA Industries is designed for corrosion-resistance testing of painted, plated, coated and untreated metal components. Our corrosion test chambers are suitable for automotive parts, fasteners, electroplated products, powder-coated panels, sheet-metal components, electrical enclosures and fabricated engineering products used in industrial and laboratory applications.
Our Salt Spray Chamber in Gurgaon creates a controlled saline-fog environment for comparing coating quality, surface-treatment performance and material corrosion resistance. Small, medium and large chamber capacities are available for manufacturers, quality-control departments, testing laboratories, research centres and industrial users.
Page Contents
Salt Spray Chamber in Gurgaon Overview
Gurgaon, also known as Gurugram, is one of the leading industrial and corporate centres of Haryana and Delhi NCR. The region has strong activity in automotive components, electrical equipment, electronics, sheet-metal fabrication, metal finishing, engineering products, construction hardware, telecom equipment and general manufacturing.
Industrial products used in Gurgaon and nearby NCR manufacturing regions may be exposed to humidity, salts, chemicals, polluted air and changing temperatures. These conditions can cause rusting, pitting, blistering, coating separation and early failure of metal components.
A salt spray chamber, also called a salt fog chamber or corrosion test chamber, produces a controlled corrosive atmosphere inside an enclosed testing space. A prepared saline solution is atomized into fine fog while chamber temperature, air pressure, solution concentration, pH, fog collection rate and test duration are monitored.
The equipment is used for comparative testing, coating evaluation, production-quality inspection and process-development work. Salt spray test hours should not automatically be converted into exact years of outdoor service life unless a scientifically validated product-specific correlation is available.
UMA Industries helps customers select the right Salt Spray Chamber in Gurgaon according to specimen dimensions, testing standard, exposure duration, automation requirement and available laboratory space.
Visit our salt spray chamber manufacturer in India page to explore our complete corrosion-testing equipment range.
Supply of Salt Spray Chamber in Gurgaon Industrial Areas
UMA Industries supplies salt spray chambers to manufacturing plants, laboratories, fabricators, coating units, metal-finishing companies and engineering industries throughout Gurgaon, Manesar and nearby Delhi NCR industrial belts.
Major Industrial Areas in Gurgaon and Gurugram
- Udyog Vihar Phase I, II, III, IV and V
- IMT Manesar
- Sector 37 Industrial Area
- Sector 34 Industrial Area
- Sector 18 Industrial Area
- Hero Honda Chowk industrial surroundings
- Khandsa Road industrial area
- Basai industrial area
- Kadipur Industrial Area
- Pace City I and Pace City II
- Bilaspur industrial belt
- Pataudi Road industrial area
- Sohna Road industrial surroundings
- Binola and nearby logistics-industrial zone
Nearby NCR Industrial Hubs
- Dharuhera, Bawal and Rewari industrial areas
- Bhiwadi, Chopanki, Tapukara and Khushkhera
- Neemrana and Shahjahanpur industrial belt
- Faridabad, Ballabgarh, Prithla and IMT Faridabad
- Delhi, Okhla, Bawana, Mayapuri and Narela
- Noida, Greater Noida, Surajpur and Kasna
- Ghaziabad, Sahibabad and Mohan Nagar
- Bahadurgarh and MIE Bahadurgarh
- Sonipat, Kundli, Rai and Barhi
Customers can also view our salt spray chamber in Delhi, salt spray chamber in Faridabad and salt spray chamber in Noida pages for nearby regional supply information.
Testing Standards for Salt Spray Chamber in Gurgaon
Our corrosion test chambers can support commonly followed salt spray testing procedures. Exact temperature, solution concentration, pH, sample angle, fog collection rate and test duration must be selected according to the applicable product or customer specification.
- ASTM B117: Standard practice for operating salt spray or salt fog apparatus.
- ISO 9227: Corrosion tests in artificial atmospheres using salt spray methods.
- JIS Z 2371: Japanese industrial standard for salt spray testing.
- Customer-specific procedures: Approved purchaser test conditions may also be followed.
For authoritative information about the standard, refer to the ASTM International ASTM B117 resource.
Our ASTM B117 salt spray chamber page provides additional information about standard-oriented corrosion-testing equipment.
7 Trusted Features and Benefits
- Corrosion-resistant construction: The chamber body, lid, racks and internal parts are manufactured using suitable materials for prolonged saline-fog exposure.
- Digital temperature control: A digital controller maintains the selected chamber temperature through automatic heater operation.
- Uniform fog generation: The atomizer creates a fine saline mist and distributes it through the working zone without directly spraying specimens.
- Regulated compressed air: A pressure regulator and gauge support stable and repeatable atomization.
- Fog collection system: Collection funnels help operators verify the rate of saline-fog deposition.
- Digital test-duration monitoring: An hour meter or programmable timer records total exposure time.
- Multiple chamber capacities: Standard and customized sizes are available for fasteners, panels, fabricated parts and larger specimens.
Additional Equipment Features
- Salt-solution reservoir with low-level indication
- Optional automatic filling and level control
- Optional automatic wastewater drainage
- Over-temperature warning indication
- Corrosion-resistant heating arrangement
- Adjustable atomization controls
- Non-corroding specimen racks
- Test-completion buzzer and indicator
- User-friendly electrical control panel
- Optional touchscreen or programmable controller
- Customized racks and chamber dimensions
- Standard 220–230 VAC, 50 Hz electrical supply
Our Salt Spray Chamber in Gurgaon is designed to provide practical operation, stable control, proper fog distribution and dependable technical support for industrial corrosion testing.
Applications of Salt Spray Chamber in Gurgaon
Automotive Component Manufacturing
Gurgaon and Manesar have a strong automotive manufacturing base. Salt spray testing is used for brackets, springs, fasteners, plated fittings, stamped parts, clamps, coated parts and metal assemblies.
Electroplating and Metal Finishing
Electroplating companies test zinc, nickel, chrome and other metallic coatings to assess passivation quality, coating consistency and corrosion resistance.
Paint and Powder-Coating Plants
Painted and powder-coated panels are evaluated for rusting, blistering, coating creepage, under-film corrosion and loss of adhesion.
Fastener Manufacturers
Nuts, bolts, screws, washers, rivets, clamps and threaded components are tested to compare plating processes and protective surface finishes.
Sheet-Metal and Fabrication Units
Fabricated panels, electrical cabinets, brackets, enclosures and machinery parts can be evaluated before use in corrosive industrial environments.
Electrical and Electronics Industries
Control panels, junction boxes, connectors, outdoor enclosures, lighting parts and mounting hardware can be tested for corrosion resistance.
Telecom and Infrastructure Components
Outdoor cabinets, mounting brackets, cable accessories, tower hardware and infrastructure parts can be tested for corrosion resistance before field use.
Testing Laboratories
Independent laboratories, educational institutes and research centres use these chambers for comparative studies, coating development and product qualification.
Calibration Procedure for Salt Spray Chamber in Gurgaon
Periodic calibration and routine verification help maintain repeatable test conditions. Calibration should be performed by trained personnel using traceable reference instruments wherever required.
Temperature Verification
- Place a calibrated temperature sensor inside the working zone.
- Set the controller to the required test temperature.
- Allow sufficient stabilization time.
- Compare the chamber display with the reference instrument.
- Record readings and calculate the deviation.
- Adjust the controller only through an approved procedure.
Air-Pressure Gauge Verification
- Connect a calibrated master pressure gauge.
- Operate the system at the normal atomization pressure.
- Compare the installed gauge with the master gauge.
- Record the error and recalibrate or replace the gauge if required.
Fog Collection Verification
- Clean and correctly position the collection funnels.
- Prepare the solution according to the selected standard.
- Operate the chamber until stable fog conditions develop.
- Collect condensate for the prescribed period.
- Measure the collected solution with a calibrated measuring cylinder.
- Adjust air pressure or solution flow when the result is outside tolerance.
For many neutral salt spray procedures, a collection rate of approximately 1.0 to 2.0 ml per hour for each 80 cm² collection area is commonly specified. Confirm the exact requirement from the applicable standard.
Solution pH and Concentration
Calibrate the pH meter using certified buffer solutions before measurement. Prepare the test solution with purified water and salt of the required quality. Verify concentration using an approved mass, density, conductivity or specific-gravity method.
Timer and Safety-System Verification
Compare the chamber timer with a calibrated stopwatch. Test low-level sensors, over-temperature protection, alarms, drainage controls and electrical interlocks before long-duration testing.
Operating Procedure
- Clean the chamber and remove residue from the previous test.
- Check electrical earthing, compressed-air supply and drainage.
- Prepare the saline solution according to the selected standard.
- Measure and record the solution concentration and pH.
- Fill the solution reservoir carefully.
- Position specimens on corrosion-resistant racks.
- Maintain the required sample angle and spacing.
- Place the fog-collection funnels correctly.
- Close the chamber lid securely.
- Set the required temperature and test duration.
- Start heating and allow the chamber to stabilize.
- Start atomization and confirm uniform fog generation.
- Verify the collection rate after stabilization.
- Record temperature, pressure, pH and collection values.
- Stop atomization before opening the chamber.
- Remove and evaluate specimens according to the test procedure.
- Clean the chamber, atomizer, reservoir and collection funnels.
Safety Precautions and User Instructions
- Install the chamber on a stable and level surface.
- Provide proper electrical earthing and circuit protection.
- Operate the chamber in a ventilated testing area.
- Use clean, filtered and oil-free compressed air.
- Wear protective gloves and safety glasses.
- Do not inhale salt fog or lean over the open chamber.
- Stop atomization before opening the lid.
- Do not operate heaters without the required water level.
- Use purified water and salt of the specified quality.
- Do not use contaminated containers or instruments.
- Do not direct the atomizer toward test specimens.
- Do not overload specimen racks or obstruct fog circulation.
- Clean the atomizer regularly to prevent blockage.
- Disconnect electrical power and compressed air before maintenance.
- Allow only trained personnel to perform repairs and calibration.
- Dispose of used solution according to local environmental requirements.
Available Salt Spray Chamber Models
UMA Industries offers small, medium and large salt spray chamber models for different specimen sizes, testing durations and laboratory requirements. Customers selecting a Salt Spray Chamber in Gurgaon can choose a standard capacity or request customized dimensions according to the application.
Small Salt Spray Chamber Models
- 162-litre salt spray chamber
- 240-litre salt spray chamber
- 270-litre salt spray chamber
- 288-litre salt spray chamber
Medium Salt Spray Chamber Models
- 294-litre salt spray chamber
- 324-litre salt spray chamber
- 360-litre salt spray chamber
- 400-litre salt spray chamber
- 420-litre salt spray chamber
Large Salt Spray Chamber Models
- 480-litre salt spray chamber
- 540-litre salt spray chamber
- 640-litre salt spray chamber
- 800-litre salt spray chamber
- 1000-litre salt spray chamber
For model selection, chamber dimensions and technical specifications, visit our contact page and share your specimen size, required test standard and preferred chamber capacity.
Why Choose UMA Industries?
- Standard and customized chamber capacities
- Corrosion-resistant chamber construction
- Digital temperature and test-duration controls
- Models suitable for ASTM B117 and ISO 9227 procedures
- Optional automatic filling and drainage controls
- Customized specimen racks
- Installation and operating guidance
- Calibration and maintenance support
- Supply throughout Gurgaon, Manesar and Delhi NCR
UMA Industries supplies dependable Salt Spray Test Chamber SST-216B for laboratories and industrial users requiring practical operation, reliable controls and technical assistance.
Frequently Asked Questions
1. Where can I buy Salt Spray Test Chamber SST-216B?
UMA Industries supplies standard and customized chambers throughout Gurgaon, Gurugram, Manesar, Udyog Vihar, Dharuhera, Bawal, Rewari, Bhiwadi and nearby NCR industrial regions.
2. Which testing standards can be followed?
The equipment can support ASTM B117, ISO 9227, JIS Z 2371 and approved customer-specific corrosion-test procedures.
3. What is the normal test temperature?
Neutral salt spray testing commonly uses a chamber temperature near 35°C. The exact set point and tolerance must be taken from the selected standard.
4. Can the chamber size be customized?
Yes. Working capacity, specimen racks, controls, automation and chamber dimensions can be customized according to the application.
5. How frequently should the chamber be calibrated?
Calibration frequency depends on usage and the quality-management system. Annual calibration supported by routine intermediate verification is commonly followed.
6. Can salt spray hours predict exact outdoor life?
No. Salt spray testing provides comparative laboratory results and should not automatically be converted into exact outdoor service years.
7. Is installation support available?
Installation guidance, operating instructions, calibration assistance and after-sales technical support are available according to the supplied model.
8. Which Gurgaon industrial areas are served?
Supply is available in Udyog Vihar, IMT Manesar, Sector 37, Sector 34, Sector 18, Pace City, Kadipur, Bilaspur, Pataudi Road, Sohna Road and nearby NCR industrial zones.
Request a Salt Spray Test Chamber SST-216B Quotation
Contact UMA Industries with your applicable test standard, specimen dimensions, required chamber capacity, automation preference and installation location.
Visit our contact page to request specifications, prices and model-selection assistance.
Need help choosing? Call/WhatsApp us for industrial pH/ORP solutions.
Reviews
There are no reviews yet.