PH Sensor 3 Meter Cable

PH Sensor 3 Meter Cable is supplied by UMA Industries for industrial monitoring, control, safety and process applications. A pH sensor, probe or electrode converts hydrogen-ion activity in a liquid into an electrical signal for a compatible pH meter or controller. Correct sensor selection depends on liquid chemistry, temperature, pressure and installation method.

MCS products are selected according to the actual machine or process requirement. Customers can share the application, input signal, measurement range, output requirement, supply voltage, panel size and operating conditions for technical review before ordering.

Technical Details

• Digital pH Meter : Online Panel Mounted with 2 point calibration.
• Online pH Meter : with 0 to 10 volt analog output and 2 point calibration
• Digital pH Meter : with 0-20 MA output and 2 point calibration
• Digital pH Meter : with 485 Modbus protocol and 2 point calibration
• pH Meter Table Top : for Laboratory use and 2 point calibration
• Sensor / Probe / Electrode for pH Meter / pH Controller
• Online pH Controller with 2 Point Calibration, 1 Set Point and Single Relay output
• Digital pH Controller with 2 Point Calibration, 2 Set Point and 2 Relay output
• Online pH Controller Online with 2 Point Auto Calibration, 2 Set Point and 2 Relay output
• pH Controller Online with 2 Point Auto Calibration, 2 Set Point and 2 Relay output, Dosing Quantity and Analysis Time Setting
• Panel mounted pH Meter Modbus RTU 485 – fits standard 96 × 96 mm panel cut-out
• RS-485 Modbus RTU communication for PLC / HMI / SCADA / data logger

Operating Principle

The instrument receives a sensor, pulse, switch, electrical or process input according to its product family. Internal electronics process the signal and provide indication, counting, timing, monitoring, communication or relay control according to the selected configuration.

Applications

• Online pH meters and controllers
• Laboratory and process-liquid measurement
• RO, ETP, STP and chemical dosing systems
• Replacement and maintenance applications

Key Benefits

• Standard signal interface for compatible instruments
• Replaceable sensing element
• Suitable cable options for installation needs
• Technical guidance for sensor selection

Installation and Selection Guidance

• Confirm the complete application and operating environment before selection.
• Match the input or sensor type with the selected instrument.
• Verify supply voltage, mounting size, output type and control logic.
• Install the product in a clean panel or suitable protected location.
• Keep signal wiring separated from high-current and VFD cables where applicable.
• Use proper earthing, protection and qualified electrical installation practices.

Operation and Maintenance

• Follow the product wiring and operating instructions.
• Inspect terminals, cables, sensors and mechanical mounting periodically.
• Keep the display, enclosure and ventilation areas clean.
• Verify calibration, counting accuracy, timing or relay action as applicable.
• Disconnect electrical power before service or wiring changes.

Why Choose UMA Industries?

• MCS industrial products supplied from Faridabad, Haryana
• Application-based technical guidance before dispatch
• Pan-India supply for manufacturers, OEMs and system integrators
• Support for correct model, input, output and sensor selection

Frequently Asked Questions

What is pH Sensor / Probe / Electrode?

It is an industrial instrument or system used for measurement, monitoring, safety, timing, counting or automatic process control according to the selected product family.

Where is this product used?

Typical applications include industrial machines, control panels, water-treatment systems, process plants, laboratories and production-monitoring installations.

How should the correct model be selected?

Selection should consider the input signal, measurement range, sensor type, output requirement, supply voltage, mounting size and operating environment.

Is technical guidance available?

Yes. UMA Industries provides technical guidance for model selection, application and installation before supply.

Is the product available?

Yes. The product is available for supply across India from our Faridabad manufacturing unit.

Can it be integrated into an industrial control panel?

Panel integration depends on the selected model, enclosure size, electrical supply, input and output configuration.

What information is needed for a quotation?

Share the application, required range or capacity, sensor/input type, output requirement, operating supply, quantity and delivery location.

Are customised configurations available?

Application-specific configurations may be considered where technically feasible. Confirm the exact requirement before ordering.

How should the product be maintained?

Keep the unit clean and dry, inspect terminals and sensors, follow the operating instructions and verify calibration or function periodically where applicable.

Who manufactures the product?

MCS brand industrial instruments and controllers are manufactured or supplied by UMA Industries from Faridabad, Haryana.