UMA Industries manufactures and supplies the Forward Reverse Timer for industrial sequencing applications that need separate forward and reverse timing, a visible run-status display, and flexible delay control. This model is built for machine-panel use, where a control sequence must switch motion direction in a planned cycle rather than by manual guesswork. Manufactured at UMA Industries’ unit in Village Sunped, Ballabgarh, Faridabad, Haryana, India, it is supported across India with technical guidance for selection, wiring, commissioning, and routine use.
Forward Reverse Timer for machine sequencing and cyclic control
The Forward Reverse Timer is intended for control elements that must run in one direction and then the opposite direction with either a stop delay or continuous changeover, depending on the selected timing logic. The company’s supplied product description notes separate forward and reverse time setting, optional in-between delay time, on-line display of time and run status, and time selection in seconds or minutes. For practical panel use, that means the timer can support alternating motion, cycle timing, and direction-based process control where repeatable sequence timing matters.
Published website pricing is company-confirmed, and quotation-stage details such as mounting arrangement, wiring interface, accessory needs, or dispatch mode may be finalized as per project requirements. If you are comparing timing products for your panel, this Forward Reverse Timer is useful to review alongside related control units such as Counter with Timer, Digital Counter, and Dosing Pump Timer when you need matching logic, counting, or process-timing functions.
Technical features, selection points, and panel fit
According to the supplied product details, the timer offers range 000 to 999, seconds/minutes/hours mode for both times individually, resolution 1, potential free relay output, front-panel button calibration, sensor or switch input, bright seven-segment LED display, operating voltage 220 Vac, and body material PP/ABS. The physical size listed in the source is 96 x 96 x 110, which is useful for panel planning and cut-out compatibility checks. These are the core facts available for review; any exact mounting or interface compatibility should be matched to the final control panel design before ordering.
For selection, first decide whether your process needs a stop interval between forward and reverse changeover or a direct changeover sequence. Then confirm whether seconds mode, minutes mode, or hours mode is appropriate for the machine cycle. If the timer is used with sensors, switches, or a PLC-style input, verify the control signal format and relay loading at the quotation stage. That step helps avoid wiring mismatch and ensures that the final panel behavior follows the intended sequence from the start.
For broader panel planning, you may also compare this model with Human Sensing Timer or Reject and Good Pcs detector when your application includes presence logic, counting, or line inspection. These comparisons can help purchasing teams decide whether a dedicated timing controller is enough or whether the panel needs a different function set.
Practical applications for the Forward Reverse Timer
The Forward Reverse Timer suits industrial use where timed directional movement is needed in a repeatable cycle. Typical buyer use cases include reversing mechanisms, alternate-direction drives, machine testing sequences, and equipment that must wait for a preset pause before reversing. Because the timer has a visible display and a potential free relay output, it is easier to integrate into operator panels that need clear status indication and external control wiring. It is also suitable where a compact panel-mounted timer is preferred over a larger controller.
Other related products on the site may help when your panel needs adjacent functions. For example, Digital Length Meter is relevant where length counting is required, while Tip and Bit Detector Controller and 2 Hand Operating Device Power Press illustrate different industrial control and machine-safety contexts. The right product depends on whether your project needs timing, counting, sensing, or guarded operator logic.
How to operate the Forward Reverse Timer
Operation is based on setting the forward time, reverse time, and, where needed, the in-between stop time. The supplied copy indicates that time can be set individually in second or minute mode, and that the timer can work with or without stop time between ON and OFF states. In practical panel use, the operator or commissioning technician typically selects the required mode, enters the time values through the front panel buttons, and then verifies the displayed run status during the first cycle.
The bright seven-segment LED display helps the user confirm the active timing state. Since the source mentions sensor/switch input, the installation should be planned with the correct trigger logic from the connected device. For best results, use a controlled commissioning procedure: verify supply voltage, check output relay response, confirm that forward and reverse commands follow the intended sequence, and review any interlock needs before handing over the panel to operations. Where the timer is paired with a machine drive or contactor, the sequence should be tested without load first so that the direction change can be verified safely.
Forward Reverse Timer setup notes for stable use
When commissioning the Forward Reverse Timer, keep the wiring layout neat, segregate signal and power conductors where possible, and confirm that the load connected to the potential free relay matches the control design. The panel cut-out and enclosure depth should be checked against the 96 x 96 x 110 listed size during the quotation stage. If the timer is part of a larger line-control panel, document the selected timing mode and the sequence logic so that maintenance staff can reproduce the same settings later if required. It is also useful to label the forward, reverse, and stop-delay settings near the panel documentation so operators can understand the sequence quickly during shift changes.
Calibration, routine verification, and maintenance
The supplied description mentions front-panel button calibration, which makes routine verification straightforward during startup or after a process change. A sensible maintenance routine is to periodically confirm the displayed timing value, the relay switching response, the input trigger behavior, and the physical condition of the terminals. Dust removal from the panel area, inspection of cable terminations, and verification of display visibility are practical steps for long-term reliability in industrial environments.
If the timer is part of a production line, maintenance teams should record the selected timing mode, the forward and reverse duration values, and any stop delay used in the cycle. That record helps reduce setup errors after servicing or replacement. When a quotation is being prepared, it is also useful to note the operating voltage, the intended control input, the space available in the panel, and the output wiring expectation so the final configuration can be matched more accurately to the machine environment. For customers who manage several monitoring or control stations, UMA also offers related products such as Digital Humidity Meter and Humidity Sensor, which may be useful in supporting environmental monitoring around control panels or process areas.
Quotation preparation, ordering checks, and support terms
Manufactured at UMA Industries’ unit in Village Sunped, Ballabgarh, Faridabad, Haryana, India, the this product is backed by company support for customers across India. UMA Industries supplies and provides technical support to customers across India, which is useful for buyers who need pre-order guidance, installation clarification, or post-purchase assistance for panel integration. Ready-stock compact products, controllers, spares, and accessories may be dispatched by air courier within 3 working days, subject to availability, payment confirmation, destination serviceability, and carrier schedules. Delivery timelines for complete salt spray chambers and other large equipment are confirmed separately according to model, capacity, packing, and freight mode.
The company-confirmed website price supports faster commercial review, while final project details such as accessory selection, wiring accessories, transport mode, and delivery schedule can be finalized in quotation or proforma invoice. Before requesting a quotation, buyers should confirm the preferred mode of operation, the timer range needed, whether a stop delay is required, the type of external input, and the space available in the panel. This helps the sales team prepare the most suitable configuration and reduces avoidable changes later in the purchase cycle.
For applications that need a related but different control function, you may also review Digital Thickness Controller, tds meter modbus rtu rs485, or Digital Counter. These links can help procurement teams compare whether their project needs pure timing, measurement, or counting support. The final product choice should always follow the actual machine sequence and the control logic already planned for the panel.
Frequently asked questions
Q1. What does the this product do?
It controls directional timing by allowing separate forward and reverse time settings, with optional stop delay depending on the selected mode.
Q2. Can the this product work in seconds and minutes?
Yes. The supplied product description states seconds or minutes mode individually, and also mentions seconds, minutes, and hours for both times individually.
Q3. Does it provide output for external control wiring?
Yes. The source specifies a potential free relay output with display, which is useful for industrial panel integration.
Q4. What input type is mentioned for the this product?
The supplied details mention sensor or switch input, so the final wiring should match the actual control signal used in the panel.
Q5. Is the this product suitable for machine panels?
Yes. Its compact size, LED display, and directional timing function make it suitable for many industrial machine-control panels.
Q6. Where is the this product manufactured?
It is manufactured at UMA Industries’ unit in Village Sunped, Ballabgarh, Faridabad, Haryana, India.
Q7. Does UMA Industries supply outside Faridabad?
Yes. UMA Industries supplies and provides technical support to customers across India.
Q8. How is the this product dispatched?
Ready-stock compact products, controllers, spares, and accessories may be dispatched by air courier within 3 working days, subject to availability, payment confirmation, destination serviceability, and carrier schedules.
Q9. What should I verify before ordering the this product?
Confirm panel size, operating voltage, load compatibility, timing mode, and sequence logic so the selected configuration matches your application.
Q10. How can I request a quotation for the this product?
Contact UMA Industries with your panel requirement, timing sequence, and wiring needs so the company can confirm the suitable configuration and dispatch method.
If you need a dependable industrial timing solution, the this product from UMA Industries is ready for review, quotation, and panel integration support. Contact us for model matching, technical guidance, and order processing.
Selection Guidance for Forward Reverse Timer
Use the verified product configuration, installation conditions and required control functions when selecting Forward Reverse Timer.
Need help choosing? Call/WhatsApp us for industrial pH/ORP solutions.
Reviews
There are no reviews yet.