UMA Industries manufactures and supplies the Event Counter for industrial pulse counting, production tracking and preset relay action, with a clear 6-digit LED display and practical installation for shop-floor equipment. This Event Counter is a compact digital counter meter designed for automation systems where repeatable counting, visible readout and relay-based control are needed. Manufactured at UMA Industries’ unit in Village Sunped, Ballabgarh, Faridabad, Haryana, India, it is supported with technical assistance across India.
Why this Event Counter suits industrial counting tasks
The Event Counter is intended for situations where each incoming pulse represents one event, one piece, one cycle or one machine action. The display shows the count directly, and the preset function can trigger relay output when the set value is reached. That makes it useful for production monitoring, batch completion, machine cycle totals and other repetitive counting applications. The unit’s 6-digit bright LED display helps operators read the count quickly on the line.
For buyers comparing counter styles, this Event Counter sits in the practical middle ground between simple display-only totalizers and more application-specific controllers. It is compact, easy to install and suitable when the application needs visible counting plus relay logic rather than a large multifunction panel. Published prices on the website are company-confirmed, while the final configuration should still be aligned to your application during quotation.
Applications in production and automation
The Event Counter is commonly selected for automated or semi-automated systems where a pulse signal must be counted reliably. Typical use cases include production count monitoring, batch completion indication, limit-switch based part counting, test rig cycle logging and simple machine indexing tasks. Because the count is retained during power failure, the operator does not lose the recorded total after a brief outage.
In a factory environment, the counter can support process visibility at the point of use. For example, an operator can track a target number of parts, and the relay output can be used to indicate completion or initiate a downstream action when the preset count is reached. The unit is suitable for industrial installations that prefer a readable front panel and straightforward wiring to a proximity sensor or limit switch.
At the plant level, buyers often combine the Event Counter with related control and monitoring products. You may also review our Counter with Timer for time-plus-count use, Digital Counter for related counting applications, Digital Length Meter for length-based counting setups, and Reject and Good Pcs detector for production inspection workflows.
Technical overview and selection guidance
The Event Counter uses a 6-digit, seven-segment bright LED display with a range of 000000 to 999999 and a resolution of 1. The input is specified for proximity sensor or limit switch signals, and the output is a potential free relay contact rated at 5A. The operating voltage is 220 Vac and the body is PP/ABS. The size is 96 × 48 × 110. These are the product facts currently supplied for this page, and they help buyers match the unit to panel space and control requirements.
When selecting the right counter, think first about the signal source, counting speed requirements, the need for preset relay action and the visibility needed on the shop floor. If your panel already uses a proximity sensor or limit switch, this this product may be a direct fit. If you need count plus time logic, review the Counter with Timer. If your application is more focused on line-tracking or production detection, the Digital Counter and Digital Length Meter options can also be compared during quotation.
UMA Industries’ quotation process allows product size, capacity, internal and external dimensions, power supply, optional controls/accessories, delivery schedule and mode of transport to be finalized according to customer requirements. That flexibility is important because control panels, sensor wiring and mounting details often vary by machine and plant layout. For the this product, the best specification is usually the one that matches your signal source, panel cut-out and operator visibility needs.
Why Choose Event Counter
In normal operation, the this product receives pulses from the connected input device and increments the displayed count by one for each valid pulse. When the preset count is reached, relay output is received, allowing the operator or machine to respond to the target total. This simple working principle makes the unit easy to understand for maintenance teams and production supervisors.
A practical operating sequence is to mount the counter in the panel, connect the sensor or switch input, wire the relay output where needed, apply the correct operating voltage and then verify counting with a controlled test run. Because the display is bright and the body is compact, the unit is suitable for machines where front-panel space is limited but the count must remain visible.
For projects that require nearby related devices, you can also evaluate the Human Sensing Timer and Dosing Pump Timer when the control task involves timed logic rather than only pulse counting.
Calibration and routine verification
Routine verification for the this product should focus on the input signal, the displayed count and the preset relay action. A practical check is to feed known pulses from the connected sensor or a test source and confirm that the display increments correctly. If the application depends on reaching a preset count, verify that the relay output changes state at the expected value and that the wiring to the connected machine behaves as intended.
Calibration here is generally an application check rather than a laboratory adjustment. The main objective is to confirm that the counter reads correctly, retains count through power interruption as specified, and responds consistently to the connected sensor or limit switch. If the machine or panel environment changes, a fresh verification run is good practice before returning the line to production.
Maintenance and safety precautions
Maintenance for the this product is straightforward: keep the panel front clean, inspect wiring terminals periodically, verify tight sensor connections and confirm that the display remains easy to read. Because the unit is used in industrial settings, it is wise to keep the panel free from dust accumulation, moisture entry and loose cable stress. If the counter is used on a machine that vibrates, check the mounting and terminal integrity during planned maintenance.
Safety precautions are equally important. Isolate the machine before wiring, follow the correct polarity and connection scheme for the input device, and ensure that the relay contact is used within its rated application. The this product is a control device, so it should be installed by a qualified technician or electrician familiar with the machine panel and site safety practices. Before final commissioning, run a controlled test count and verify the machine response at the preset value.
For additional panel-building or process-control needs, buyers may also compare Tip and Bit Detector Controller and Digital Thickness Controller, depending on the machinery involved.
Faridabad manufacturing origin, supply and dispatch
The this product is manufactured at UMA Industries’ unit in Village Sunped, Ballabgarh, Faridabad, Haryana, India. That origin is relevant for buyers who want a direct manufacturer conversation during selection, wiring discussion or quotation finalization. UMA Industries supplies and provides technical support to customers across India, making this product suitable for local plant upgrades as well as pan-India sourcing.
Ready-stock compact products, controllers, spares and accessories may be dispatched by air courier within 3 working days, subject to availability, payment confirmation, destination serviceability and carrier schedules. Delivery timelines for complete salt spray chambers and other large equipment are confirmed separately according to model, capacity, packing and freight mode. For this this product, dispatch planning is therefore handled as part of the order and quotation process, not as a blanket promise for every destination.
If you are building a broader control system, our related products page also includes options such as the Humidity Sensor and TDS meter modbus rtu rs485, which may be useful in integrated panel or monitoring projects.
Frequently asked questions
What type of signal can this Event Counter count?
This this product is specified for proximity sensor or limit switch inputs. It is intended for pulse-based counting where each valid input pulse represents one event.
Does the count remain after a power failure?
Yes. The supplied product facts state that the counting value will be retained when power fails, which is useful for production and batch tracking.
What output does the this product provide?
It provides a potential free relay contact output rated at 5A, and the relay output is received when the production count becomes equal to the preset count.
What is the display specification?
The unit uses a 6-digit bright LED seven-segment display for clear reading on industrial panels.
What is the operating voltage?
The specified operating voltage is 220 Vac. Final wiring should always match the machine panel and installation requirement.
Is this suitable for machine panels with limited space?
Yes. The body is compact and the size is supplied as 96 × 48 × 110, making it suitable for many standard panel installations.
Can I use the this product with a batch process?
Yes. The preset relay action and visible count make it useful for batch completion, target counting and repeated production cycles.
How do I choose between this and a counter with timer?
If you need only pulse counting with preset relay action, this this product is a practical choice. If your application needs time-based logic as well, compare it with the Counter with Timer.
How do I request the right configuration?
Share your input device type, panel space, supply voltage, relay-use requirement and application flow. UMA Industries can then align the quotation to your exact requirement, including any practical accessory or mounting detail.
Request a quotation
If you need a dependable industrial counting solution, the this product can be matched to your machine, panel and production workflow. Share your application details, and UMA Industries will guide the selection from Faridabad with pan-India support. For quotation and technical discussion, call 9310530941 or 8178668698.
The Event Counter remains a practical choice for manufacturing, packaging and automation users who want readable counting, preset relay logic and compact mounting in one unit. Contact UMA Industries to finalize the right configuration for your line.
Need help choosing? Call/WhatsApp us for industrial pH/ORP solutions.
Reviews
There are no reviews yet.