Temperature Controller 2 Set Point

Temperature Controller 2 Set Point

While Set Value of 1st set point of Temperature
Push SET Button Once, use UP and DN buttons to adjust the 1st Temperature value, Press ENT button to save Preset Value
Set Value of 2nd set point of Temperature
Thus Push SET Button Twice, use UP and DN buttons to adjust the 2nd SetPoint, Press ENT button to save Preset Value

Set Relay Histerisys
Switch OFF Power Press UP and DN Button at Once,  Switch ON the Power, Set Desired value between ON and OFF position

Other Meters in This Catagory: Temperature Controller 2 Set Point

1. Digital Temperature Indicator used to display temperature input sensor J type / rtd
2. Digital Temp. Controller 1 relay 1 set point hysteresis adjustable default 2 degree
3. Digital Temp. Controller 72×72 1 relay 1 set point hysteresis adjustable default 2 degree
4. Digital Oven Temp. Controller 2 Relay 2 set point for (temp. ON/ OFF and start Timer)
5. Digital Oven Tem. and Time Controller 2 Relay 2 set point (temp. ON/ OFF and start Timer)
6. Temperature Controller 2 Set Point
7. Poultry 4 fan Controller

Calibration Process:

While switch Off The Power
Press SET and UP buttons both
Switch Power ON
Use up and Down Buttons to calibrate temperature
the difference value is a % difference value
for example difference 20 means temperature calibrated by 20% ie. 20 degrees on a 100-degree scale.
if the working temperature is 200 degrees then the difference will be adjusted by 40 degrees centigrade

Technical Specification: Temperature Controller 2 Set Point

1. Range 000 to 400 Degree
2. Tolerance: +/- 2-degree centigrade
3. Display: 3 Digit LED 0.56 Inch character height, Double Display
4. Relay Operation Guaranteed within 1 Degree
5. Front Panel Calibration by Touch Switch
6. Thermocouple J Type
7. Source Supply: 220 Vac, Range 180 ~ 240 Vac
8. ABS / Plastic Body

Calibration Process:

While Switch Off The Power
Press SET and UP buttons both
Switch Power ON
Use up and Down Buttons to calibrate temperature
the difference value is a % difference value
for example difference 20 means temperature calibrated by 20% ie. 20 degrees on a 100-degree scale.
if the working temperature is 200 degrees then the difference will be adjusted by 40 degrees centigrade

Digital Temperature Controller

Like MCS Facebook Page for recent offers & Updates!