pH Meter in Bhilai
pH Meter in Bhilai is an industrial instrument used to measure the acidity or alkalinity of water, chemical solutions, cooling water, process liquids and industrial effluent. UMA Industries supplies digital pH meters, online pH meters, pH indicators, pH controllers, pH electrodes and industrial water-quality instruments for steel plants, engineering industries, foundries, fabrication units, chemical plants, power plants, ETP/STP systems, RO plants and laboratories.
Our online pH meter continuously receives the signal from a suitable pH electrode and displays the measured value on a bright digital display. Continuous pH monitoring helps operators maintain stable process conditions, control neutralisation, improve chemical dosing and reduce repeated manual testing.
Models are available with 4-20 mA output, 0-10 VDC output and RS485 Modbus communication for integration with PLC, HMI, SCADA, remote displays, recorders and industrial data-logging systems.
Technical Specifications of pH Meter in Bhilai
- Measurement Range: 0.00 to 14.00 pH
- Resolution: 0.01 pH
- Calibration: Two-point calibration using 4.00 pH and 7.00 pH buffer solutions
- Calibration Method: Front-panel manual adjustment
- Sensor Input: Standard pH electrode with BNC connector
- Display: Bright seven-segment LED display
- Power Supply: 220-230 VAC, 50 Hz
- Panel Size: 96 mm × 96 mm × 85 mm
- Enclosure: ABS or PP industrial-grade body
- Mounting: Panel-mounted online type
- Optional Outputs: 4-20 mA, 0-10 VDC and RS485 Modbus
- Applications: Water, chemicals, cooling water, ETP, STP, RO and process liquids
pH Meter Supply in Bhilai Industrial Areas
We supply pH Meter in Bhilai to steel plants, rolling mills, engineering industries, foundries, fabrication units, chemical-processing plants, water-treatment companies, laboratories, system integrators and control-panel manufacturers throughout Bhilai, Durg and nearby industrial regions.
Bhilai Steel Plant and Township Areas
Our supply coverage includes Bhilai Steel Plant, Bhilai Township, Civic Centre, Sector 1, Sector 2, Sector 4, Sector 5, Sector 6, Sector 7, Sector 8, Sector 9, Sector 10, Maroda, Risali, Maitri Kunj, Nehru Nagar and nearby plant-support areas.
Bhilai Industrial Estate and Nandini Road
We supply pH meters to Bhilai Industrial Estate, Nandini Road Industrial Area, Light Industrial Area Bhilai, Chhawani, Power House, Supela, Akash Ganga, Junwani, Kohka, Kurud and nearby engineering and fabrication clusters.
Hathkhoj and Bhilai-3 Industrial Belt
Our supply network covers Hathkhoj Industrial Area, Bhilai-3, Charoda, Bhilai Charoda, Khursipar, Transport Nagar, Devbaloda, Sirsa Gate and surrounding industrial locations.
Jamul and Kumhari Industrial Areas
We also supply to Jamul, ACC Jamul industrial belt, Kumhari, Ahiwara, Nandini Nagar, Murmunda, Dharsiwa-connected industrial areas and nearby manufacturing units.
Durg and Borai Industrial Growth Centre
Our coverage includes Durg, Pulgaon, Rasmada, Borai Industrial Growth Centre, Anjora, Utai, Anda, Nagpura, Ganiyari and surrounding industrial and institutional areas.
Nearby Industrial Cities and Manufacturing Hubs
Customers may also contact us from Raipur, Urla Industrial Area, Siltara Industrial Area, Tilda, Rajnandgaon, Balod, Bemetara, Dhamtari, Bhilai-Durg urban region, Bilaspur, Korba and nearby Chhattisgarh industrial locations.
We supply online pH meters, laboratory pH meters, pH controllers, pH indicators, electrodes, 4-20 mA instruments and RS485 Modbus models with technical guidance for model selection, installation and calibration.
Why Choose Our pH Meter in Bhilai?
- Continuous measurement from 0.00 to 14.00 pH
- Clear digital indication with 0.01 pH resolution
- Simple two-point calibration using standard buffers
- Compatible with standard BNC pH electrodes
- Panel-mounted design for industrial control panels
- Suitable for steel, engineering and water-treatment industries
- 4-20 mA and 0-10 VDC models available
- RS485 Modbus models available for PLC and SCADA
- pH controllers available for automatic chemical dosing
Applications of pH Meter in Bhilai
Steel Plants and Rolling Mills
Steel plants and rolling mills use pH meters for cooling water, pickling systems, process water, scale-pit water, wastewater treatment and chemical-treatment applications.
Metal Pickling and Surface Treatment
Pickling and surface-treatment operations require pH measurement for acid baths, rinsing systems, neutralisation tanks, phosphating and wastewater treatment.
Engineering and Fabrication Units
Engineering and fabrication industries use pH meters for component washing, surface preparation, cooling systems, process water and effluent-treatment applications.
Foundries and Casting Units
Foundries use pH meters for cooling water, sand-treatment water, scrubber water, chemical-cleaning systems and industrial wastewater monitoring.
ETP and STP Plants
Effluent-treatment and sewage-treatment plants require continuous pH measurement during neutralisation and before treated-water discharge. Online monitoring helps maintain stable treatment conditions.
RO and DM Water Plants
RO and DM water systems use pH meters for feed water, treated water, reject water, chemical dosing and final-water quality monitoring.
Cooling Towers and Boiler-Water Systems
Continuous pH measurement supports chemical-treatment control, corrosion reduction, scaling prevention and stable operation of cooling-water and boiler-water systems.
Chemical Processing Units
Chemical industries use pH meters for reaction monitoring, batch processing, mixing, acid dosing, alkali dosing and process-quality control.
Power and Utility Plants
Power and utility facilities use pH meters for boiler water, cooling water, condensate, DM water and wastewater-treatment systems.
Laboratories and Educational Institutes
Testing laboratories, colleges and research institutes use pH meters for sample analysis, solution preparation, experimentation and quality documentation.
Types of pH Meters Available in Bhilai
-
Digital pH Meter Online
– Panel-mounted pH meter with two-point calibration. -
pH Meter with 4-20 mA Output
– Suitable for PLC, recorder, remote display and SCADA systems. -
pH Meter with 0-10 VDC Output
– Suitable for analog monitoring and automation systems. -
RS485 Modbus RTU pH Meter
– Suitable for PLC, HMI, SCADA and data-logging applications. -
Table-Top Laboratory pH Meter
– Suitable for laboratory sample testing and quality control. -
pH Sensor, Probe and Electrode
– Replacement electrode for pH meters and pH controllers.
View additional instruments in our pH Meter product category.
pH Controller Supplier in Bhilai
A pH meter measures and displays the pH value. A pH controller measures the pH and also provides relay output for acid dosing, alkali dosing, neutralisation, alarm control, valve operation or process interlocking.
-
pH Controller with One Relay
– One set point and one relay output. -
pH Controller with Two Relay Outputs
– Two set points and two relay outputs. -
Digital pH Controller Online
– Industrial controller for automatic pH regulation. -
pH Controller with Dosing Quantity and Delay
– Suitable for controlled dosing and analysis-delay applications. -
RS485 Modbus RTU pH Controller
– Suitable for PLC, HMI, SCADA and data-logging systems.
View additional products in our pH Controller category.
Calibration Procedure for pH Meter
Prepare the pH Electrode
- Switch ON the pH meter and allow the reading to stabilise.
- Remove the electrode from its storage solution.
- Rinse the electrode gently with clean or distilled water.
- Shake off excess water without touching the glass sensing bulb.
Calibrate at 7.00 pH
- Dip the electrode into fresh 7.00 pH buffer solution.
- Wait until the displayed reading becomes stable.
- Adjust the 7 pH calibration control slowly.
- Set the display to exactly 7.00 pH.
Calibrate at 4.00 pH
- Remove the electrode and rinse it with clean water.
- Dip the electrode into fresh 4.00 pH buffer solution.
- Wait until the displayed reading becomes stable.
- Adjust the 4 pH or slope control slowly.
- Set the display to exactly 4.00 pH.
Verify the Calibration
- Rinse the electrode after calibration.
- Recheck the reading in the 7.00 pH buffer solution.
- Repeat calibration if the displayed value is incorrect.
- Begin sample or process measurement after successful verification.
Installation Instructions
- Install the pH meter in a clean and dry electrical panel.
- Select an electrode compatible with the liquid, temperature and pressure.
- Install the electrode where the process liquid is properly mixed.
- Avoid sensor positions where air bubbles may collect around the glass bulb.
- Keep the electrode sensing bulb continuously wet during operation.
- Keep the electrode cable away from power, motor and VFD wiring.
- Provide proper grounding to the control panel.
- Use shielded signal cable where electrical interference is high.
- Provide safe access for electrode removal, cleaning and calibration.
Work Instructions and User Precautions
- Store the pH electrode in suitable electrode-storage solution.
- Never allow a standard glass electrode to remain dry.
- Do not store the electrode in distilled or DM water for long periods.
- Do not touch, rub or scratch the glass sensing bulb.
- Use fresh 4.00 pH and 7.00 pH buffer solutions.
- Do not return used buffer solution to its original bottle.
- Clean the electrode according to the process contamination.
- Protect the meter from water splash, metallic dust and excessive heat.
- Inspect the electrode cable and BNC connector regularly.
- Replace the electrode if readings become slow, unstable or incorrect.
7 Powerful Benefits of pH Meter in Bhilai
- Continuous pH measurement and clear digital indication
- Better monitoring of cooling water and process liquids
- Improved chemical dosing and neutralisation control
- Reduced dependence on repeated manual testing
- Suitable for steel, engineering and heavy industries
- PLC, SCADA and data-logging output options available
- Simple calibration, maintenance and electrode replacement
FAQs About pH Meter in Bhilai
What is a pH Meter?
A pH meter is an analytical instrument used to measure the acidity or alkalinity of water, chemicals and industrial process liquids.
What is the measurement range?
The standard measuring range is 0.00 to 14.00 pH with a display resolution of 0.01 pH.
Do you supply pH Meter in Bhilai?
Yes, we supply digital pH meters, online pH meters, pH controllers, indicators, electrodes and sensors throughout Bhilai, Durg and nearby industrial areas.
Which Bhilai industrial areas do you serve?
We supply to Bhilai Steel Plant, Bhilai Industrial Estate, Nandini Road Industrial Area, Hathkhoj, Bhilai-3, Charoda, Jamul, Kumhari, Rasmada and Borai Industrial Growth Centre.
Which industries use pH Meters in Bhilai?
pH meters are used in steel plants, rolling mills, engineering units, foundries, pickling plants, power plants, ETP, STP, RO, DM water and laboratory applications.
Can I obtain a pH Meter with 4-20 mA output?
Yes, online pH meters are available with 4-20 mA output for PLC, recorder, remote display and SCADA systems.
Is an RS485 Modbus pH Meter available?
Yes, RS485 Modbus RTU pH meters are available for PLC, HMI, SCADA and data-logging integration.
How is the pH Meter calibrated?
The pH meter is calibrated using fresh 7.00 pH and 4.00 pH buffer solutions through the provided calibration controls.
Do you supply pH electrodes?
Yes, we supply pH electrodes, probes and sensors suitable for online pH meters, laboratory meters, indicators and pH controllers.
Can a pH Controller operate a dosing pump?
Yes, a suitable pH controller can operate an acid or alkali dosing pump through its relay output. Use an interposing relay or contactor according to the pump rating.
Can the meter be used for cooling-tower water?
Yes, a suitable online pH meter can be used for continuous monitoring of cooling-tower water, provided the electrode is compatible with the water temperature and chemical-treatment conditions.
Do you supply pH Meters throughout Chhattisgarh?
Yes, we supply pH meters, pH controllers, electrodes and industrial water-quality instruments throughout Chhattisgarh and across India.
External Technical References
-
WHO – Water, Sanitation and Health
-
US EPA – Water Quality Criteria
-
General pH Measurement Reference
Business Partner and Dealer Opportunity
Dealers, distributors, system integrators, control-panel manufacturers, RO plant manufacturers and industrial-instrument suppliers may contact us for business cooperation involving pH meters, pH controllers, electrodes and industrial water-quality instruments.
Our Other Websites
-
phmeters.in
– pH meters, controllers, electrodes and industrial instruments. -
salt-spray-chamber.in
– Salt spray chambers and corrosion-test equipment. -
water-tank.in
– Water-storage and chemical-storage tanks. -
YouTube Channel
– Product demonstrations and updates. -
MCS Facebook Page
– Product news and updates. -
Robotech Learning Channel
– Technical tutorials and product videos.
Buy pH Meter in Bhilai
Contact UMA Industries for pricing, technical specifications, output selection, electrode selection and correct model recommendations. We supply pH Meter in Bhilai, online pH meters, pH controllers, pH probes and industrial water-quality instruments throughout Chhattisgarh and India.
Need help choosing? Call/WhatsApp us for industrial pH/ORP solutions.
Reviews
There are no reviews yet.