Salt Spray Test Chamber SST-162B

Hence The  Specifications and features of This Salt Spray Test Chamber SST-162B

1. Chamber Capacity 162 Liter for Laboratory :  Basic Model
2. Chamber Size : L*W*H = 600 mm*600 mm*450 mm
3. Overall Size ( Space Required For Machine) approx. : L*W*H = 775 mm*700 mm*675 mm

Other Models in Catagory :Salt Spray Chamber

1. Salt Spray Test Chamber 162A Standered for Laboratory
2. Salt Spray Test Chamber 162B ASTMb117 for Laboratory
3. Salt Spray Test Chamber 216A Standered
4. Salt Spray Test Chamber 216B ASTM b117
5. Salt Spray Test Chamber 240A Standered b117
6. Salt Spray Test Chamber 1KB ASTM b117 Graphical Display
7. Coustom Designed as per Any Other Size or Specification

Feature : 162 Liter (Over all Size 775*700*675 MM)

1. Main Chamber PP, 8 MM Sheets
2. Acrylic Transparent Top 5 MM
3. Material Hangers 4 -6 Hanging Rods (Depending on Max. Job Size)
4. Main Water Tank Separated From Spray Chamber. Capacity 15 Liters.
5. Saline Solution Label Low in Reservoir Tank Indication at front panel.
6. Auto fill and label maintaining System for Reservoir Saline tank. Sensors available for maintaining water level between high and low levels.
7. Chamber Waste water Auto Drainage Control Systems. (No manual drain)
8. Fully Automatic Temperature Controller double display for Heating of Water.
9. Temperature over Heat Warning Indicator on front panel.
10. Well Insulated Electric Shock Free, anti-Corrosion, Unbreakable Heaters (Life 10 Years/ No Glass Heater)
11. Fogging System Side ways
12. Standardized Fogg collection System
13. Hour Meter 999 Hours 59.9 Minutes
14. Process Complete Buzzer Alarm with Indicator
15. Supply 220 VAc
16. Warranty 1 Year

ASTM–B 117

ISO 9227 ‘Corrosion tests in artificial atmospheres

1. SCOPE:-

Hence this apparatus suitable to salt spray (fog) testing of ferrous and nonferrous metals and also used to test inorganic and organic especially. While where such tests are the basis for material or products specifications.

2. APPARATUS:- 

Hence the apparatus required for salt spray (fog) testing consists of a “Fog Chamber” Salt solution chamber, Air Supply System. While one or more atomizing nozzle, specimen supports, heaters for heating salt solution, and necessary means of control.

Temperature Controller:- 

Hence to Control the temperature of Humidity / Chamber for heating of fogged water, with Auto Cut system to maintain the temperature within the specified range 32 to 37 degrees Celsius.

Temperature Indicator:-

Hence to Observe temperature of Exposure Chamber. The exposure zone of the salt spray chamber shall be maintained at 35 +/_ 2 degrees C. While Digital Timer 6 digits:- To observe/inspect the condition of test samples periodically and recording long with time. But At least 3 digits in Hour and 2 digits in minutes

pH Meter:- 

Hence pH Meter Provided To check ph Value of solution used for spray.  While The pH value of salt solution shall be such that when atomized at 35 degrees C the collected solution will be in the pH range from 6.5 to 7.2

AIR SUPPLY:- 

Hence The air supply must be free from Oil, Dust, , the air supply/pressure must be maintained in such a way so that salt fog occurs. While Pressure must be 1 Kg +/-  0.2 Kg

ATOMIZATION AND QUANTITY OF FOG:- 

Hence The fog shall be such that for every 80 cm2 (4 Inch Funnel ) of horizontal collecting area. While there will be collected from 1.0 to 2.0 mL of solution per hour based on an average run of at least 16 h

Hance Power Supply 220 VAc; and Warranty 1 year

pH Meter

Like MCS Facebook Page for recent offers & Updates!