Conductivity Sensor for Water Quality Monitoring

Conductivity Sensor for Water Quality Monitoring is supplied by UMA Industries for industrial monitoring, control, safety and process applications. TDS and conductivity instruments are used to monitor dissolved ionic content and electrical conductivity in water and process solutions. Meter, controller and sensor variants support indication, control and dosing applications.

MCS products are selected according to the actual machine or process requirement. Customers can share the application, input signal, measurement range, output requirement, supply voltage, panel size and operating conditions for technical review before ordering.

Technical Details

• Confirm the expected water quality band before choosing the sensor range.
• Check whether the controller needs a sine-wave probe input.
• Verify the supply voltage and the available panel power.
• Confirm whether the body material and cable route suit the environment.
• Decide if you need an immersed probe, flow-based setup, or a test-bench arrangement.
• Range: 000 to 9999 MCM
• Resolution: 1 mcm
• Tolerance: +/- 1%
• Output: sine wave
• Operating voltage: 5 VDC
• Body: PP/ABS, size 16 x 110
• RO and DM water plants

Operating Principle

The instrument receives a sensor, pulse, switch, electrical or process input according to its product family. Internal electronics process the signal and provide indication, counting, timing, monitoring, communication or relay control according to the selected configuration.

Applications

• RO and DM water plants
• Cooling towers and boilers
• Water treatment and chemical processing
• Quality laboratories and process automation

Key Benefits

• Continuous water-quality indication
• Controller and relay options where applicable
• Sensor options for online installation
• Useful for dosing and treatment control

Installation and Selection Guidance

• Confirm the complete application and operating environment before selection.
• Match the input or sensor type with the selected instrument.
• Verify supply voltage, mounting size, output type and control logic.
• Install the product in a clean panel or suitable protected location.
• Keep signal wiring separated from high-current and VFD cables where applicable.
• Use proper earthing, protection and qualified electrical installation practices.

Operation and Maintenance

• Follow the product wiring and operating instructions.
• Inspect terminals, cables, sensors and mechanical mounting periodically.
• Keep the display, enclosure and ventilation areas clean.
• Verify calibration, counting accuracy, timing or relay action as applicable.
• Disconnect electrical power before service or wiring changes.

Why Choose UMA Industries?

• MCS industrial products supplied from Faridabad, Haryana
• Application-based technical guidance before dispatch
• Pan-India supply for manufacturers, OEMs and system integrators
• Support for correct model, input, output and sensor selection

Frequently Asked Questions

What is TDS and Conductivity Instrument?

It is an industrial instrument or system used for measurement, monitoring, safety, timing, counting or automatic process control according to the selected product family.

Where is this product used?

Typical applications include industrial machines, control panels, water-treatment systems, process plants, laboratories and production-monitoring installations.

How should the correct model be selected?

Selection should consider the input signal, measurement range, sensor type, output requirement, supply voltage, mounting size and operating environment.

Is technical guidance available?

Yes. UMA Industries provides technical guidance for model selection, application and installation before supply.

Is the product available in Water Quality Monitoring?

Yes. The product is available for supply to Water Quality Monitoring and across India from our Faridabad manufacturing unit.

Can it be integrated into an industrial control panel?

Panel integration depends on the selected model, enclosure size, electrical supply, input and output configuration.

What information is needed for a quotation?

Share the application, required range or capacity, sensor/input type, output requirement, operating supply, quantity and delivery location.

Are customised configurations available?

Application-specific configurations may be considered where technically feasible. Confirm the exact requirement before ordering.

How should the product be maintained?

Keep the unit clean and dry, inspect terminals and sensors, follow the operating instructions and verify calibration or function periodically where applicable.

Who manufactures the product?

MCS brand industrial instruments and controllers are manufactured or supplied by UMA Industries from Faridabad, Haryana.