Flow Sensor 2 inch

Introduction : While Magnetic flow sensors are operate on the principle that the movement of a conductor through a magnetic field provides a voltage. Flow Sensor 2 inch. Hence They consist of a flow tube that generates the magnetic field in the pipeline. While an electronic converter that measures induced voltage.

Main Content :

Hence it has large 2-inch diameter Water Flow meter Sensor. While can be used to measure flow rate from 10 – 200 Liter / min. Hence 2 inch is a plastic body water flow sensor that contains a water rotor and a hall-effect sensor. While it is used for flow measurement for industrial applications. When the water flows through the rotor Hence the rotor are rolls.

main features are :

Light-weight, small in size, easy to install.
Inlaid with stainless steel impeller shaft, durable wearable.
The seal ring with the upper and lower force structure never leaks.
Non-violent shock, and chemical erosion.
Non-throwing or hitting otherwise may damage.
Mounted vertically, should not exceed 5 degrees inclination.
The temperature of the medium should not be exceed 120 ℃.

Technical Specifications :Flow Sensor 2 inch

Working voltage range: DC 5 to 18 V
Hence it is Waterproof, Heat resistance, pressure resistance, cold resistance, Easy to install.
Flow range: 10-200 Liter per min
Sensor: Hall effect
Maximum current: 15 mA (5 volt DC)
Operating Temp: up to 80C,Operating humidity: 35 % to 90 % RH
Allow compression: Water pressure 1.75 Mpa below
Insulation resistance: >100 M OHM
Storage Temperature: – 25 to 80 C
Storage humidity: 25 % to 95 % RH
Output Waveform: Square Wave, output pulse signal.
Size: 92 mm x 68 mm
Hence we should connect the sensor with a digital flow controller as given below:
Red Wire : Positive (+)
Yellow wire : Signal output.
Black wire : Negative (-).

OUR Other Website

1. PH Meter
2. Salt Spray Chamber
3. Water Tanks
4. You Tube Channel
5. Like MCS Facebook Page for recent offers & Updates!

pH Meter
Like MCS Facebook Page for recent offers & Updates!