pH Meter In AURIC
pH Meter In AURIC is an industrial online pH measuring instrument used for continuous monitoring of acidity and alkalinity in water, process liquids, effluent, RO water, STP water, chemical solutions and industrial wastewater. UMA Industries supplies digital pH meters, online pH meters, pH controllers, pH sensors, pH electrodes and water-quality instruments for industries located in AURIC, Shendra, Bidkin, Waluj, Chikalthana, Paithan Road and Aurangabad industrial areas.
AURIC, also known as Aurangabad Industrial City, is an important industrial zone for manufacturing, engineering, automobile components, food processing, pharmaceuticals, packaging, water treatment and process industries. These industries require reliable pH monitoring for RO plants, ETP plants, STP plants, chemical dosing, wastewater neutralisation and process-water quality control.
pH Meter In AURIC is suitable for panel-mounted online measurement, laboratory testing support and automation systems where pH value must be displayed clearly and monitored regularly.
Technical Specifications of pH Meter In AURIC
- Product Name: pH Meter In AURIC
- Measurement Parameter: pH
- Measurement Range: 0.00 to 14.00 pH
- Resolution: 0.01 pH
- Display: Digital LED display
- Calibration: Two-point calibration using 4.00 pH and 7.00 pH buffer solutions
- Sensor Input: pH electrode / pH sensor with suitable connector
- Mounting: Panel-mounted online type
- Panel Size: 96 x 96 mm standard panel mounting, model dependent
- Power Supply: 220–230 VAC, 50 Hz, or as per model design
- Optional Output: 4-20 mA, 0-10 VDC or RS485 Modbus RTU
- Application: RO, ETP, STP, process water, chemical dosing and industrial water-quality monitoring
What is pH Meter In AURIC?
pH Meter In AURIC is a digital instrument used to measure the pH value of water or liquid. The pH value shows whether the liquid is acidic, neutral or alkaline. A pH value below 7 is acidic, 7 is neutral and above 7 is alkaline.
In industrial plants, pH measurement is important because wrong pH can affect product quality, chemical dosing, equipment life, effluent treatment and discharge compliance. A digital online pH meter continuously displays the pH value so that operators can monitor the process and take corrective action.
pH Meter Supply in AURIC and Nearby Industrial Areas
AURIC Shendra Industrial Area
We supply pH Meter In AURIC to industries in AURIC Shendra, Shendra MIDC, Shendra Five Star Industrial Area and nearby manufacturing units. These areas have automobile, engineering, packaging, food and industrial process units where pH monitoring is required in water-treatment and effluent-treatment systems.
AURIC Bidkin Industrial Area
AURIC Bidkin is developing as a large industrial and manufacturing zone. We supply online pH meters, pH controllers and pH electrodes for process water, ETP, STP, RO plant and wastewater-neutralisation applications in this belt.
Waluj MIDC
Waluj MIDC is one of the major industrial areas near Aurangabad. Industries in Waluj require pH meters for electroplating, surface treatment, chemical processing, automobile components, engineering units and effluent-treatment plants.
Chikalthana MIDC
Chikalthana industrial area has engineering, pharmaceutical, food, packaging, plastic and manufacturing units. Our pH meters are suitable for RO water, treated water, chemical dosing and wastewater applications in Chikalthana.
Paithan Road and Aurangabad Industrial Belt
We also supply pH meters to Paithan Road, Railway Station MIDC, Aurangabad city industrial areas, Jalna Road, Beed Bypass and nearby industrial locations.
Nearby Maharashtra Industrial Cities
Supply is also available for Jalna, Paithan, Sillod, Kannad, Ahmednagar, Nashik, Pune, Chakan, Ranjangaon, Shirdi, Vaijapur and other Maharashtra industrial areas.
Applications of pH Meter In AURIC
RO Plants
RO plants use pH meters to check feed water, treated water, reject water and chemical dosing condition. Correct pH monitoring helps protect membranes and maintain water quality.
ETP Plants
Effluent-treatment plants use pH meters for neutralisation, acid dosing, alkali dosing and final-discharge checking. A pH Meter In AURIC is useful for industries that must monitor wastewater before discharge.
STP Plants
Sewage-treatment plants use pH meters for inlet, aeration, treated-water and reuse-water monitoring.
Chemical Dosing Systems
pH meters are used with dosing systems for acid and alkali correction. When automatic control is required, a pH controller with relay output can operate a dosing pump.
Electroplating and Surface Treatment
Electroplating, phosphating, pickling, rinsing and surface-treatment processes require pH monitoring to maintain bath condition and effluent quality.
Automobile and Engineering Industries
Automobile and engineering plants in AURIC and Aurangabad use pH meters in utility water, process water, washing systems, ETP plants and chemical-treatment systems.
Food and Beverage Industries
Food-processing units use pH measurement for process water, cleaning water, treated water and effluent-treatment applications.
Pharmaceutical and Laboratory Applications
Pharmaceutical plants and laboratories use pH meters for water-quality testing, process-support systems, sample testing and quality-control applications.
Cooling Tower and Boiler Water
Cooling-tower and boiler-water treatment systems use pH monitoring to reduce scaling, corrosion and process disturbance.
Why Choose Our pH Meter In AURIC?
- Suitable for online pH measurement
- 0.00 to 14.00 pH range
- 0.01 pH resolution
- Simple calibration with 4.00 and 7.00 buffer solutions
- Compatible with industrial pH electrodes
- Useful for RO, ETP, STP and process-water systems
- Optional 4-20 mA, 0-10 VDC or RS485 Modbus RTU output
- Suitable for PLC, HMI, SCADA and data logging
- Panel-mounted design for control panels
- Supply support for AURIC, Shendra, Bidkin and Aurangabad industrial areas
Types of pH Instruments Available
- Digital pH Meter Online – For continuous pH indication in industrial plants.
- pH Meter with 4-20 mA Output – Suitable for PLC and recorder systems.
- pH Meter with 0-10 VDC Output – Suitable for analog input systems.
- RS485 Modbus RTU pH Controller – Suitable for PLC, HMI and SCADA communication.
- Table-Top pH Meter – Suitable for laboratory sample testing.
- pH Sensor and Electrode – Replacement sensor for pH meters and controllers.
View more products in our pH Meter product category.
pH Controller Options for AURIC Industries
If your application requires automatic acid dosing or alkali dosing, UMA Industries also supplies pH controllers with relay output and optional Modbus communication.
- pH Controller with One Relay – Suitable for dosing or alarm applications.
- pH Controller with Two Relay Outputs – Suitable for acid and alkali dosing control.
- Digital pH Controller Online – Industrial pH controller for process control.
- pH Controller with Dosing Quantity and Delay – Suitable for controlled dosing applications.
View more models in our pH Controller category.
Calibration Procedure for pH Meter In AURIC
Prepare the pH Sensor
- Connect the pH electrode to the pH meter.
- Switch ON the instrument and allow the reading to stabilise.
- Remove the electrode from storage solution.
- Rinse the glass bulb gently with clean water.
- Do not rub the glass bulb with cloth or hard material.
Calibrate at 7.00 pH
- Take fresh 7.00 pH buffer solution in a clean beaker.
- Dip the pH sensor into the buffer solution.
- Wait until the reading becomes stable.
- Adjust the 7 pH calibration setting.
- Set the display to exactly 7.00 pH.
Calibrate at 4.00 pH
- Remove the sensor from 7.00 pH buffer and rinse it.
- Dip the sensor into fresh 4.00 pH buffer solution.
- Wait until the reading becomes stable.
- Adjust the 4 pH or slope calibration setting.
- Set the display to exactly 4.00 pH.
Final Verification
- Recheck the reading in 7.00 pH buffer.
- Install the sensor in process liquid after successful calibration.
- Check the actual process reading after installation.
- Repeat calibration periodically according to process condition.
Installation Instructions
- Install the pH meter in a clean and protected control panel.
- Install the pH electrode in a tank, pipeline, flow cell or sample chamber.
- Keep the pH bulb continuously wet during operation.
- Avoid air bubbles near the sensor bulb.
- Install the sensor where liquid is properly mixed.
- Keep sensor cable away from motor, VFD, contactor and high-voltage wiring.
- Use shielded cable where electrical noise is present.
- Provide proper earthing in the panel.
- Keep the sensor accessible for cleaning and calibration.
Work Instructions and Precautions
- Use fresh pH buffer solutions for calibration.
- Do not return used buffer solution to the original bottle.
- Do not touch the glass bulb with fingers.
- Do not allow the pH sensor to remain dry for long periods.
- Store the pH electrode in proper electrode-storage solution.
- Do not store pH electrode in DM water or distilled water for long-term storage.
- Clean the sensor according to process contamination.
- Replace the electrode if calibration is not stable after cleaning.
Common Problems and Troubleshooting
- Reading unstable: Check pH sensor, cable shielding, grounding and process flow.
- Calibration not possible: Clean or replace electrode and use fresh buffer solution.
- Slow response: Clean sensor bulb and keep electrode in storage solution before reuse.
- Wrong reading: Check calibration, buffer solution and sensor age.
- Display normal but process value wrong: Check sensor installation point and sample mixing.
- PLC value not correct: Check 4-20 mA, 0-10 VDC or RS485 scaling depending on output type.
Industries Using pH Meter In AURIC
- RO plant manufacturers
- ETP and STP contractors
- Water-treatment companies
- Automobile component manufacturers
- Engineering industries
- Food and beverage industries
- Pharmaceutical industries
- Chemical process industries
- Packaging industries
- Cooling-tower water-treatment companies
- Boiler-water treatment companies
- PLC and control-panel manufacturers
7 Powerful Benefits of pH Meter In AURIC
- Continuous online pH measurement
- Useful for RO, ETP, STP and process-water systems
- 0.01 pH resolution for better indication
- Simple two-point calibration
- Optional analog or Modbus communication output
- Suitable for PLC, HMI, SCADA and data logging
- Available for AURIC, Shendra, Bidkin and Aurangabad industrial users
FAQs About pH Meter In AURIC
What is pH Meter In AURIC?
It is a digital online pH meter supplied for industries in AURIC and nearby Aurangabad industrial areas for water, effluent and process-liquid pH measurement.
What is the pH range?
The standard pH measurement range is 0.00 to 14.00 pH.
What is the resolution?
The common display resolution is 0.01 pH.
Can it be used in RO plants?
Yes, it is suitable for RO feed water, treated water, reject water and chemical dosing applications.
Can it be used in ETP and STP plants?
Yes, it is suitable for ETP neutralisation, treated-water checking, STP monitoring and final-discharge observation.
Can it connect to PLC?
Yes, pH meters are available with optional 4-20 mA, 0-10 VDC or RS485 Modbus RTU output for PLC and automation systems.
Does it require calibration?
Yes, regular calibration is required using fresh 7.00 pH and 4.00 pH buffer solutions.
Which sensor is used with this pH meter?
A compatible pH electrode or pH sensor is used with the pH meter. Sensor selection depends on liquid type, cable length, temperature and installation method.
Do you supply pH controllers also?
Yes, UMA Industries supplies pH meters, pH controllers, pH electrodes and online water-quality instruments.
Do you supply in AURIC Shendra and AURIC Bidkin?
Yes, supply is available for AURIC Shendra, AURIC Bidkin, Waluj, Chikalthana and other Aurangabad industrial areas.
Do you supply throughout India?
Yes, UMA Industries supplies pH meters, pH controllers, sensors and industrial instruments throughout India.
External Technical References
Business Partner and Dealer Opportunity
Dealers, distributors, RO plant manufacturers, ETP/STP contractors, control-panel manufacturers, PLC/SCADA integrators, water-treatment companies and industrial-instrument suppliers may contact UMA Industries for business cooperation involving pH meters, pH controllers, pH sensors and water-quality instruments in AURIC and Maharashtra industrial areas.
Our Other Websites
- phmeters.in – pH meters, pH controllers, electrodes and industrial instruments.
- salt-spray-chamber.in – Salt spray chambers and corrosion-test equipment.
- water-tank.in – Water-storage and chemical-storage tanks.
- YouTube Channel – Product demonstrations and technical updates.
- MCS Facebook Page – Product news and updates.
- Robotech Learning Channel – Technical tutorials and product videos.
Buy pH Meter In AURIC
Contact UMA Industries for model selection, pH sensor selection, output option, calibration support and technical guidance. We supply pH Meter In AURIC, online pH meters, pH controllers, pH electrodes and water-quality instruments for AURIC, Shendra, Bidkin, Waluj, Chikalthana, Aurangabad and all India.
Need help choosing? Call/WhatsApp us for industrial pH/ORP solutions.
Reviews
There are no reviews yet.