pH Meter Table Top
pH Meter Table Top is a laboratory instrument used for measuring the acidity or alkalinity of water, chemical solutions, laboratory samples, process liquids and treated water. UMA Industries supplies table-top pH meters, digital pH meters, online pH meters, pH indicators, pH controllers, pH sensors and industrial water-quality instruments for laboratories, RO plants, ETP/STP plants, chemical industries, pharmaceutical utilities, food-processing units and educational institutes.
A table-top pH meter is mainly used where accurate sample testing is required in a laboratory, quality-control room, R&D department or water-testing setup. It is suitable for regular pH measurement of liquid samples, buffer solutions, treated water, raw water, effluent samples and chemical process samples.
The pH Meter Table Top is easy to use, simple to calibrate and suitable for daily laboratory testing. It works with a compatible pH electrode and displays the measured pH value digitally.
Technical Specifications of pH Meter Table Top
- Product Name: pH Meter Table Top
- Measurement Parameter: pH
- Measurement Range: 0.00 to 14.00 pH
- Resolution: 0.01 pH
- Display: Digital display
- Calibration: Two-point calibration using 4.00 pH and 7.00 pH buffer solutions
- Sensor Input: Compatible glass pH electrode
- Use Type: Table-top / laboratory use
- Application: Water testing, laboratory sample testing, chemical solution testing and quality-control checking
- Power Supply: As per model design
- Suitable For: Laboratories, RO plants, water-treatment companies, schools, colleges, industries and R&D departments
What is pH Meter Table Top?
pH Meter Table Top is a bench-type laboratory pH measuring instrument used to test liquid samples. The pH electrode is dipped into the sample, and the instrument displays the pH value on the digital display.
The pH value indicates whether a liquid is acidic, neutral or alkaline. A pH value below 7 indicates acidic nature, 7 indicates neutral condition and above 7 indicates alkaline nature. Table-top pH meters are widely used for sample testing because they provide convenient operation and better laboratory handling compared with simple manual pH paper testing.
Why pH Meter Table Top is Used
- To measure pH value of liquid samples in laboratories
- To check water quality in RO and water-treatment plants
- To test chemical solutions during preparation and process checking
- To verify treated-water and effluent-water samples
- To support quality-control testing in industries
- To perform routine testing in educational and research laboratories
- To provide a clear digital pH reading instead of colour-based indication
Applications of pH Meter Table Top
Laboratory Sample Testing
Laboratories use table-top pH meters for testing water samples, chemical solutions, process samples, prepared solutions and quality-control samples.
RO and DM Water Testing
RO plants and DM water systems use a pH Meter Table Top for checking feed water, treated water, reject water and final-water quality during routine testing.
ETP and STP Sample Testing
Effluent-treatment and sewage-treatment plants use table-top pH meters for sample testing during neutralisation, treatment-stage checking and final-discharge verification.
Chemical Laboratories
Chemical laboratories use table-top pH meters for solution preparation, acid and alkali testing, reaction checking, dilution control and process-sample analysis.
Pharmaceutical and R&D Labs
Pharmaceutical utilities, R&D labs and quality-control departments use pH meters for purified-water testing, laboratory solutions, product-support testing and documentation.
Food and Beverage Testing
Food and beverage units use table-top pH meters for checking water, cleaning solutions, raw-material samples, process samples and quality-control parameters.
Educational Institutes
Schools, colleges, universities and technical institutes use table-top pH meters in chemistry laboratories, environmental labs and water-quality training applications.
Agriculture and Soil-Water Testing
Agriculture laboratories and testing centres use pH meters for water testing, fertilizer solution testing and sample analysis where pH value is important.
Textile and Dyeing Labs
Textile and dyeing laboratories use pH meters for dye bath samples, washing-water samples, chemical solution preparation and quality-control checking.
Cooling Tower and Boiler Water Testing
Maintenance teams use table-top pH meters for testing cooling-water and boiler-water samples to support chemical-treatment monitoring.
Why Choose Our pH Meter Table Top?
- Suitable for regular laboratory pH testing
- Clear digital pH display
- 0.01 pH resolution
- Simple calibration using standard buffer solutions
- Compatible with glass pH electrode
- Useful for RO, ETP, STP and industrial water testing
- Suitable for laboratories, colleges and quality-control rooms
- Easy operation for daily sample testing
Difference Between pH Meter Table Top and Online pH Meter
A pH Meter Table Top is used for laboratory sample testing. The operator takes a liquid sample, dips the pH electrode into the sample and reads the pH value on the instrument display.
An online pH meter is installed in a control panel and connected to a process pH electrode for continuous pH measurement in a tank, pipeline, flow cell or treatment plant. Online pH meters are used where continuous monitoring is required, while table-top pH meters are used where sample testing is required.
Difference Between pH Meter Table Top and pH Controller
A table-top pH meter measures and displays the pH value of a sample. A pH controller measures pH and also provides relay output for acid dosing, alkali dosing, alarm operation or automatic process control.
For laboratory testing, a pH Meter Table Top is suitable. For automatic dosing or continuous process control, a pH controller is required.
Compatible pH Sensors and Electrodes
A table-top pH meter requires a compatible pH electrode. The pH electrode should be selected according to sample type, temperature, chemical compatibility, connector type and cable length.
- pH Sensor and Electrode – Replacement electrode for pH meters and pH controllers.
- Table-Top Laboratory pH Meter – Laboratory pH meter for sample testing.
- Digital pH Meter Online – Panel-mounted pH meter for continuous online indication.
- pH Meter with 4-20 mA Output – Suitable for PLC, recorder and SCADA systems.
- pH Meter with 0-10 VDC Output – Suitable for analog monitoring systems.
- RS485 Modbus RTU pH Controller – Suitable for PLC, HMI and SCADA integration.
View more instruments in our pH Meter product category.
pH Controller and Online pH Meter Options
For customers who need continuous process measurement or automatic dosing, UMA Industries also supplies online pH meters and pH controllers.
- pH Controller with One Relay – Suitable for dosing or alarm applications.
- pH Controller with Two Relay Outputs – Suitable for acid and alkali dosing control.
- Digital pH Controller Online – Industrial pH controller for automatic pH control.
- pH Controller with Dosing Quantity and Delay – Suitable for controlled dosing applications.
- RS485 Modbus RTU pH Controller – Suitable for PLC, HMI and SCADA systems.
View more models in our pH Controller product category.
Calibration Procedure for pH Meter Table Top
Prepare the pH Meter and Electrode
- Place the table-top pH meter on a clean and stable laboratory bench.
- Connect the pH electrode to the instrument.
- Switch ON the pH meter and allow the reading to stabilise.
- Remove the electrode from the storage solution.
- Rinse the glass bulb gently with clean or distilled water.
- Do not touch or rub the glass sensing bulb.
Calibrate at 7.00 pH
- Take fresh 7.00 pH buffer solution in a clean beaker.
- Dip the pH electrode into the 7.00 pH buffer solution.
- Wait until the reading becomes stable.
- Adjust the 7 pH calibration setting on the meter.
- Set the display to exactly 7.00 pH.
Calibrate at 4.00 pH
- Remove the electrode from 7.00 pH buffer and rinse it with clean water.
- Take fresh 4.00 pH buffer solution in another clean beaker.
- Dip the electrode into the 4.00 pH buffer solution.
- Wait until the reading becomes stable.
- Adjust the 4 pH or slope calibration setting.
- Set the display to exactly 4.00 pH.
Verify Calibration
- Rinse the electrode after calibration.
- Recheck the reading in fresh 7.00 pH buffer solution.
- Repeat calibration if the reading is not correct.
- Start sample testing only after successful calibration.
How to Use pH Meter Table Top
- Place the meter on a clean table or laboratory bench.
- Connect the pH electrode properly.
- Switch ON the meter and wait for stable display.
- Calibrate the meter with standard buffer solutions.
- Rinse the electrode before testing the sample.
- Dip the electrode in the liquid sample.
- Wait until the reading becomes stable.
- Note the pH value.
- Rinse the electrode after measurement.
- Store the electrode in proper storage solution.
Storage Instructions for pH Electrode
- Keep the pH electrode glass bulb wet when not in use.
- Store the electrode in proper electrode-storage solution.
- Do not keep the electrode dry for long periods.
- Do not store the pH electrode in distilled water or DM water for long-term storage.
- Keep the protective cap fitted when the electrode is not in use.
- Store the electrode in a clean and safe location to avoid glass damage.
Work Instructions and Precautions
- Use fresh pH buffer solution for calibration.
- Do not return used buffer solution to the original bottle.
- Rinse the electrode between different samples.
- Do not touch the glass bulb with fingers.
- Do not rub the glass bulb with cloth or hard material.
- Use a clean beaker for each buffer and sample.
- Do not pull the electrode by cable.
- Protect the instrument from water splash and chemical spillage.
- Replace the electrode if reading becomes slow, unstable or incorrect after cleaning and calibration.
Cleaning of pH Electrode
The pH electrode should be cleaned according to the sample type and contamination. General deposits can be removed by gentle rinsing with clean water. Oily deposits, chemical coating, biological deposits or scale may require a suitable cleaning solution according to laboratory procedure.
After cleaning, rinse the electrode with clean water, keep it in storage solution for some time and then calibrate the pH meter with fresh 7.00 pH and 4.00 pH buffer solutions.
Industries and Users of pH Meter Table Top
- Testing laboratories
- Educational institutes
- Pharmaceutical laboratories
- Food and beverage industries
- Chemical laboratories
- RO plant manufacturers
- Water-treatment companies
- ETP and STP operators
- Textile and dyeing laboratories
- Cooling-tower water-treatment companies
- Boiler-water treatment companies
- Research and development departments
7 Powerful Benefits of pH Meter Table Top
- Suitable for laboratory and quality-control testing
- Clear digital pH reading
- Simple two-point calibration
- Useful for water, chemical and process samples
- Convenient bench-top operation
- Compatible with glass pH electrode
- Suitable for laboratories, RO plants, ETP/STP plants and educational institutes
FAQs About pH Meter Table Top
What is pH Meter Table Top?
A pH Meter Table Top is a laboratory pH measuring instrument used for testing liquid samples on a table or laboratory bench.
Where is table-top pH meter used?
It is used in laboratories, RO plants, ETP plants, STP plants, schools, colleges, chemical labs, food labs, pharmaceutical labs and water-testing applications.
What is the measurement range?
The standard pH measurement range is 0.00 to 14.00 pH, depending on the connected electrode and instrument model.
What is the resolution?
The common display resolution is 0.01 pH.
Can it be used for RO water testing?
Yes, table-top pH meters are suitable for RO feed water, permeate water, reject water and treated-water sample testing.
Can it be used for ETP and STP samples?
Yes, it can be used for testing ETP and STP samples during treatment, neutralisation and final-discharge checking.
Does the pH meter require calibration?
Yes, calibration is required using fresh 7.00 pH and 4.00 pH buffer solutions for accurate measurement.
Which electrode is used with table-top pH meter?
A compatible glass pH electrode is used with the table-top pH meter. Connector type and electrode suitability should be confirmed before replacement.
Can the pH electrode be stored dry?
No, a standard glass pH electrode should not be stored dry for long periods. It should be stored in proper electrode-storage solution.
What is the difference between table-top and online pH meter?
A table-top pH meter is used for sample testing. An online pH meter is installed for continuous process measurement.
What is the difference between pH meter and pH controller?
A pH meter measures and displays pH. A pH controller also provides relay output for dosing, alarm or automatic control.
Do you supply pH Meter Table Top in India?
Yes, UMA Industries supplies pH Meter Table Top, online pH meters, pH controllers, pH sensors and water-quality instruments throughout India.
External Technical References
Business Partner and Dealer Opportunity
Dealers, distributors, laboratory-equipment suppliers, RO plant manufacturers, ETP/STP contractors, educational-instrument suppliers, control-panel manufacturers and industrial-instrument dealers may contact UMA Industries for business cooperation involving table-top pH meters, pH sensors, online pH meters, pH controllers and industrial water-quality instruments.
Our Other Websites
- phmeters.in – pH meters, pH controllers, electrodes and industrial instruments.
- salt-spray-chamber.in – Salt spray chambers and corrosion-test equipment.
- water-tank.in – Water-storage and chemical-storage tanks.
- YouTube Channel – Product demonstrations and updates.
- MCS Facebook Page – Product news and updates.
- Robotech Learning Channel – Technical tutorials and product videos.
Buy pH Meter Table Top
Contact UMA Industries for pricing, technical specifications, electrode selection, compatibility confirmation and correct model recommendations. We supply pH Meter Table Top, pH sensors, online pH meters, pH controllers and industrial water-quality instruments throughout India.
Need help choosing? Call/WhatsApp us for industrial pH/ORP solutions.
Reviews
There are no reviews yet.