Flow Sensor 1/4 inch

Hence Magnetic flow sensors operate on the principle that the movement of a conductor through a magnetic field provides a voltage. While Flow Sensor 1/4 inch, They consist of a flow tube that generates the magnetic field in the pipeline. Thus an electronic converter that measures induced voltage.

Main Containt :

While This 1/4 inch water flow sensor is basically a small turbine whose output signal is a series of digital pulses. Hence The frequency of the pulses is proportional to the flow rate of the liquid passing through the sensor. So That digital signal, whose frequency is in the range between 0Hz and 100Hz. Hence it can be read directly through one of the digital

Properties :

This flow sensor is mainly used for accurate flow measurement. It may be installed in the hot water inlet end for detecting water flow.
When water through the flow rotor assembly. While the magnetic rotor will rotate and the Speed of a rotor will change as the flow change.
Hall current sensor Read the pulses and provide output corresponding pulse signal and feedback sent to the controller.
then the controller will measure the flow and display the value in terms of flow speed and total volume passed through the sensor.
these sensors may be used for water heaters, credit card machines, water vending machines, flow measurement devices.

main features are : Flow Sensor 1/4 inch

Light-weight, small size, easy to install.
Inlaid with stainless steel impeller shaft, durable wearable.
The seal ring with the upper and lower force structure never leaks.
Non-violent shock, and chemical erosion.
Non-throwing or hitting.
Mounted vertically, should not exceed 5 degrees inclination.
The temperature of the medium should not exceed 120 ℃.
Technical Specifications :
Minimum rated working voltage: DC 5~24V;
Max. working current: 15mA (DC 5V);
Working voltage range: DC 5~18V;
Load capability: <= 10mA (DC 5V);
Working temperature: <= 80’C;
Humidity range: 35%~90%RH (no frost);
Water pressure: <1.75Mpa;
Storage temperature: -25~80’C; Storage humidity: 25~95%RH;
Flow range: 1~5L/min’; Frequency: 4380 pulse for 1L through the sensor
Dimensions: 2.28 in x 1.38 in x 1.06 in (5.8 cm x 3.5 cm x 2.7 cm)
Thread Size : G1/4″
we should connect the sensor with digital flow controller as given below:
Red: Positive(+)
Yellow: Signal output.
Black: Negative(-)

OUR Other Website

1. PH Meter
2. Salt Spray Chamber
3. Water Tanks
4. You Tube Channel
5. Like MCS Facebook Page for recent offers & Updates! 

pH Meter
Like MCS Facebook Page for recent offers & Updates!