Salt Spray Test Chamber SST-162B – 162 Liter ASTM B117 Laboratory Model

The Salt Spray Test Chamber SST-162B is a compact and accurate corrosion testing system
designed for laboratory and quality control applications.
This Salt Spray Test Chamber SST-162B is manufactured in accordance with
ASTM B117 and ISO 9227 standards for neutral salt spray (NSS) testing.

With a 162 liter chamber capacity, the Salt Spray Test Chamber SST-162B is ideal
for testing electroplated, painted, powder-coated and surface-treated components where
repeatable corrosion performance evaluation is required.

Capacity & Dimensions – Salt Spray Test Chamber SST-162B

• Chamber Capacity: 162 Liter (Laboratory Basic Model)
• Chamber Size (L × W × H): 600 × 600 × 450 mm
• Overall Size / Space Required: approx. 775 × 700 × 675 mm
• Power Supply: 220 VAC, single phase
• Warranty: 1 Year

Key Features – Salt Spray Test Chamber SST-162B

• Main chamber fabricated from 8 mm thick PP sheets
• Transparent acrylic top (5 mm) for sample visibility
• 4–6 specimen hanging rods depending on job size
• Separate saline solution reservoir tank – 15 liter capacity
• Low saline level indication on front panel
• Automatic saline level control with high/low sensors
• Automatic waste water drainage (no manual draining)
• Automatic temperature controller with dual display
• Over-temperature safety warning indicator
• Shock-free, corrosion-resistant, unbreakable heaters
• Side-mounted fogging system for uniform spray
• Standardized fog collection system as per ASTM B117
• Digital hour meter – 999 hours 59.9 minutes
• Process complete buzzer with indicator

Standards Supported – ASTM B117 & ISO 9227

ASTM B117 – Salt Spray (Fog) Test

ASTM B117 defines the apparatus, operating conditions and test procedures
for salt spray corrosion testing.
The Salt Spray Test Chamber SST-162B meets laboratory requirements
for temperature control, fog generation and fog collection.

ISO 9227 – Corrosion Tests in Artificial Atmospheres

ISO 9227 specifies methods for corrosion testing using artificial salt atmospheres.
The chamber is suitable for laboratory corrosion evaluation as per ISO guidelines.

Technical reference (authority link):

Salt spray corrosion test – ASTM B117

Working Principle – Salt Spray Test Chamber SST-162B

In the Salt Spray Test Chamber SST-162B, a saline solution is atomized
through specially designed nozzles to produce a fine fog.
Test specimens are mounted on hanging rods inside the chamber
and exposed to controlled salt fog conditions.

• Uniform fog distribution inside exposure chamber
• Exposure temperature maintained at 35 ± 2°C
• Continuous monitoring of fog collection and pH

Recommended Test Parameters (Typical ASTM B117)

Temperature Control

Exposure zone temperature is maintained at 35 ± 2°C
using an automatic temperature controller.

pH of Collected Solution

The pH of collected solution is maintained between
6.5 and 7.2 at 35°C using a laboratory pH meter.

Air Supply

Clean, oil-free compressed air is supplied at
1.0 kg/cm² ± 0.2 to generate stable salt fog.

Fog Collection Rate

Fog collection is maintained between
1.0 to 2.0 mL per hour
per 80 cm² collection area averaged over a minimum 16-hour run.

Typical Applications – Salt Spray Test Chamber SST-162B

• Electroplated components (zinc, nickel, chrome)
• Powder-coated and painted parts
• Automotive fasteners and hardware
• Metal finishing and surface treatment labs
• Quality control and R&D laboratories

The Salt Spray Test Chamber SST-162B is a reliable solution for
routine laboratory corrosion testing with consistent and repeatable results.

Other Salt Spray Chamber Models

1. Salt Spray Test Chamber 162A – Standard
2. Salt Spray Test Chamber SST-162B – ASTM B117
3. Salt Spray Test Chamber 216A
4. Salt Spray Test Chamber 216B – ASTM B117
5. Corrosion Test Chamber 240A
6. Salt Spray Test Chamber 1KB – Graphical Display
7. Custom salt spray chambers available as per requirement

FAQ – Salt Spray Test Chamber SST-162B

What is the use of Salt Spray Test Chamber SST-162B?

It is used to evaluate corrosion resistance of metals and coatings
by exposing samples to controlled salt fog conditions.

Which standards does SST-162B follow?

The chamber is designed for laboratory testing as per
ASTM B117 and ISO 9227.

What is the chamber capacity?

The chamber capacity is 162 liters,
suitable for small to medium laboratory test samples.

Can the chamber be customized?

Yes. Custom size and specification salt spray chambers
can be manufactured as per customer requirement.

Request Price / Quotation – Salt Spray Test Chamber SST-162B

For pricing, quotation, installation or customization details,
contact Machine Control Systems / Uma Industries.

Call / WhatsApp: +91-8178668698

Related category:
pH Meter

Like MCS Facebook Page for recent offers & updates