Safety Light Curtain SLC-3030

Safety Light Curtain sensor, Safety Light Curtain SLC-3030
OVERALL HEIGHT(MM) : 965 MM
PROTECTED HEIGHT(MM) : 900 MM
NO OF BEAM: 30 BEAM
PITCH: 30 MM
output PNP or NPN/ NC
Output indications Through corresponding LEDs
Sensor Power Supply 12-24 volts DC
Response time On to off:10-15 msec.
Operating Temperature Up to 55 Degrees centigrade
Protections Output short circuit protected
Cross Section 50X36 mm

Controller for safety Light Curtain  :

Power Supply Controller 220 VAC;
Relay Output ; 1 or 2 relay

Cable Set For Safety Light Curtain

Two Cables are Required for Installation

1. Emitter cable length 5 Meter
2.  Reciever Cable Length 3 Meter
3. with suitable Connectors at one End

Other Models in This Category:

1. Safety Light Curtain SLC-0630
2. Safety Light Curtain SLC-0830
3. Safety Light Curtain SLC-1030
4. Safety Light Curtain SLC-1230
5. Safety Light Curtain SLC-1630
6. Safety Light Curtain SLC-1830
7. Safety Light Curtain SLC-2430
8. Safety Light Curtain SLC-3030
9. As per Demand special orders

Other Features:-

Hence Sensor Power Supply  : 12-24 volts DC
while output  ; PNP or NPN/ NC
But Output indications ; Through corresponding LEDs
Also Response time On to off : 10-15 msec.
Hence No of beams : 8,10,12,16, 18, 24, 30, or as required
While Beam bypass Provided in Controller
But Adjustable Range Up to 3 meters
Also Higher Sensing range up to 5,10,15 meter. available on demand
Hence Standard Cable length 5 meters for the emitter, 3 meters for the receiver
While Operating Temperature Up to 55 Degrees centigrade
Protections Output short circuit protected
Suitable for Machines with quick emergency stop

While Safety Light curtains must comply with IEC-61496 parts 1 & 2 ; as ANSI/UL 61496 parts 1 & 2. Hence Light curtains’ “TYPE” their Safety Performance Level, must be appropriately selected. But Light curtains’ optional functions, as listed in Annex “A” of IEC-61496 part 1, must comply with Annex “A” requirements.
working Principle:
While A safety light curtain consists of two parts: Transmitter + Receiver. Hence The transmitter contains multiple Infrared LEDs that send pulses of infrared light to the receiver. When an interrupt occurred between the transmitter and receiver then we receive an output that used to stop working or raise alarm.

pH Meter
Like MCS Facebook Page for recent offers & Updates!