TDS Controller 2 SetPoint

TDS Controller with one Relay Output/ TDS Controller 2 SetPoint
Set the Trigger value of TDS using SET, UP, and down Buttons, and Save the value by pressing the ENT button.
The relay will trigger at this value and change its state NO/NC (5A) Contact, a potential-free contact that may use to start a pump or alarm as an indicator.

TDS / Conductivity Other Product in This Catagory,

Hence (MCS); It is a TDS meter distributor and supplier in India, TDS Meters are used to measure Total Dissolve Salt measured in particles per Millions ie. PPM. We have different type of TDS Meter and Controller for Industrial and Lab Use. Hence please click the link below; to Reed more about. Or Click on Link; to see more products in this category.

1. Digital TDS meter Online Panel Mounted for Industrial use
2. Digital TDS Meter Table Top for Laboratory Use
3. TDS Controller with 1 Set Point 1 Relay Output
4. TDS Controller with 2 Set Point and 2 Relay Output
5. Sensor / Probe for TDS Meter

Conductivity Meter, Online pH Meter Manufacturers in India

Hence Conductivity Meters are also known as EC meters; EC or measures in UCM and MCM. While we have different type of Conductivity Meter and Controller. Hence please click the link below; to Reed more about given products. While Click on Link; to see more products in this category.

1. Digital Conductivity meter Online used to measure EC value of any solution.
2. Digital Conductivity Meter Table Top for Laboratorie
3. Sensor / Probe for Conductivity Meter

Automatic TDS Controller ; TDS Controller 2 SetPoint

While PPM (Particle per Million) TDS value (Total Dissolved Solids) gives the sum of total dissolved solids in water. Hence These solids may be salts, minerals, and metals. Mostly Sodium and magnesium salt fond dissolved. TDS measred in PPM.

Conductivity Means:

Hence The conductivity of the water or any solid / liquid measured; indicates ions are in the water, the better it conducts electricity. While TDS meters typically quantify this conductivity; in micro siemens UCM or MCM. Hence The latter stands for parts per million; i.e. the number of solid particles per one million water mixture particles. A value of 40 ppm means that from one million particles there are 40 dissolved ions and the rest (= 999 960) are water molecules. TDS Controller 2 SetPoint

Best TDS Controller On India

What does it mean about the water quality?
Hence DM water with a ppm value of zero, is automatically free from any pesticides and drug residues, is far from it. While All the TDS meter measures are merely the number of ions in the water. Most of the pesticides; hormone-disturbing substances, and drug residues are usually no ions.

Digital TDS Controller 2 SetPoint

Hence In short: water with a low ppm value is virtually free from salts and minerals; but can hide a large cocktail of non-ionic chemicals in itself. While The result of a TDS meter is therefore not very meaningful; with regard to the actual water quality. while Other analytical methods or a water analysis by a reputable laboratory; may be better suited to find out about the actual water quality.

Digital TDS Controller Manufacturers

Observation as analyst TDS Controller 2 SetPoint
Hence if you want to check the functionality of an osmosis system; Then the mere TDS values are not suitable as an indicator of the water quality. Hence extensive and detailed water analyzes are often very expensive and only reflect a snapshot; While they are only advisable if the drinking water is to be tested; for individual substances.  It often makes more sense to invest; in a high-quality water filter right away. While This way you have more security with your daily drinking water; consumption in the long term. Hence it is essential to pay attention to appropriate assessments and long-term studies.

PH Meter

Like MCS Facebook Page for recent offers & Updates! 

Online pH Controller