PH Sensor Toshcon 10 meter Cable

PH Sensor Toshcon 10 meter Cable, for connecting pH Meter or pH Controller, Signal of pH Value Passes through this cable from Sensor to meter, pH Controller or pH meter Display the value on its display and control section provides output for that signal to operate Dosing Pump or Turn ON Buzzer etc.

design and construction of

Other Product in thie catagory: pH Sensor/ pH Probe / pH Electrode

1. pH Sensor 1 Meter cable Toshcon Brand (Glass Type). Hence pH sensor also called by peoples as pH Probe or pH Electrode. Hence all Pronounce are same.
2. pH Sensor 3 Meter cable Toshcon Brand (Glass Type)
3. pH Sensor 5 Meter cable Toshcon Brand (Epoxy Coated / Unbrackable)
4. pH Sensor 10 Meter cable Toshcon Brand (Epoxy Coated / Unbrackable)

Consturuction : ph Sensor Toshcon, Toshcon pH Electrode

1. Glass bulb: It a sensor that senses the H+ ion concentration and it made from a special type of glass and membrane. The glass bulb consists of 0.1 M HCL Solution.
2. Internal electrode: this electrode made of silver chloride.
3. Internal solution: The silver chloride electrode dipped in a buffer solution of 0.1 mol/L KCL of pH 4 to pH 7.
4. Reference Electrode: It also the silver chloride electrode use for reference.

5. Junction: It made from a ceramic junction also called a diaphragm that allows the contact of sample solution and reference electrolyte. It should not disturb the electric connection between both electrodes.
6. Filling hole: It used for refilling the electrolyte if required.
7. Electrode body: the body is from non-conductive glass or plastic material and may be coated by epoxy to prevent glass bulbs.

Property of pH Probe : PH Sensor Toshcon 10 meter Cable

While the acidic solution is rich in H+ ion concentration. When the pH probe dipped in an acidic solution. The H+ ion moves close to the glass membrane of the sensitive glass bulb (external side of the bulb). Hence Similar reaction occurs inside the bulb. Thus the membrane causing the difference in the potential (voltage). When the hydrogen ion concentration inside the glass bulb.

PH Sensor Toshcon 10 meter Cable

When the Hydrogen ions concentration across the membrane similar. Then it called neutral pH and the pH is equal to 7. while If the concentration of hydrogen ion of inside the bulb than outside solution then the given solution is alkaline and the pH is more than 7. Hence pH meter measures the potential difference at both the electrodes and calculate the pH as per the Nernst equation.

Other Products in This Category

1. Dosing Pump 6 LPH
2. Dosing Pump 10 LPH
3. Thirty LPH Dosing Pump
4. 60 LPH Dosing Pump
5. TDS Controller Dosing setting used to maintain TDS
6. Dosing Pump Controller by Sensor
7. Passivation Dosing Timer: used for dosing of passivation addition by counting of jigs and set ML according to consumption average.
8. Dosing Pump Timer
9. Conductivity Controller Dosing setting
10. PH Controller with Dosing Quantity and delay
11. Automatic pH Dosing System
12. Dosing per KWAH :- Hence it also called as dosing per amp Hour, useful for automatic dosing of making solution in zinc plating and crome plating to maintain level as per consumption